DeoxIT Combo 3 pack - 2ml 100% solution - DeoxIT, DeoxIT Gold, and DeoxIT Fader
Below are the available bulk discount rates for each individual item when you purchase a certain amount
- Buy 2 - 3 and get 5% off
- Buy 4 - 6 and get 8% off
- Buy 7 - 10 and get 12% off
- Buy 11 or above and get 15% off
Special price on everything you need to keep your electrical or audio connections clean and protected (in 2ml squeeze tubes from Caig Labs):
- 1 x Deoxit
- 1 x Deoxit Gold
- 1 x Fader Lube
DeoxIT® D-Series - Contact Cleaner & Rejuvenator
More than a Contact Cleaner . . . Chemically Improves Connections
(without harm to metals and plastics)
DeoxIT® D-Series contact cleaner is a fast-acting deoxidizing solution that cleans, protects, lubricates and improves conductivity on all metal connectors and contacts.
Use as a general treatment for connectors, contacts and other metal surfaces, and on non-critical metal surfaces with severe oxidation and corrosion. If the metal surface is discolored, it is severe. DeoxIT® dissolves the contamination and protects the surface.
For reference, DeoxIT® has approximately 20% cleaning action.
- Improves Conductivity
- Deoxidizes, Cleans & Preserves
- Reduces Intermittent Connections
- Reduces Arcing & RFI
- Reduces Wear & Abrasion
- Temperature Range, -34 C (-29 F) to +200 C (400 F)
DeoxIT® Gold G-Series - Contact Enhancer, Conditioner & Protector
DeoxIT® Gold (formerly ProGold), is a unique conditioning solution that improves conductivity and provides long-lasting protection on gold, base metals and other precious metal contacts and connections (gold, silver, rhodium, copper, bronze, nickel, etc.).
Use on plated connectors, contacts and metal surfaces for maximum performance and protection.
Recommended for critical applications where only slight cleaning action is necessary. If the surface looks clean, applying DeoxIT D-Series contact cleaner first is usually not necessary. DeoxIT® Gold is designed to dissolve small amounts of oxidation. Apply DeoxIT® Gold after DeoxIT® D-Series contact cleaner on plated metal surfaces, except where noted with DeoxIT® Shield S-Series below. The more critical the connection or part, especially low current applications, DeoxIT® Gold should be the final step.
For reference, DeoxIT® Gold has approximately 0.5% cleaning action.
- Improves Conductivity
- Maintains Optimum Signal Quality
- Protects Base Metals from Oxidation
- Prevents Dendrite and Fretting Corrosion
- Forms Protective Anti-Tarnishing Layer
- Reduces Arcing, RFI and Intermittent Connections
- Reduces Wear and Abrasion
- Temperature Range, -34 C to +240 C
DeoxIT® Fader F-Series (formerly CaiLube MCL)
NOTE: DeoxIT® Fader is the CaiLube MCL. In 2006 we changed the CaiLube MCL name to DeoxIT® Fader, part numbers changed.
The DeoxIT® brand has gained worldwide recognition as the best solution for fixing electrical connections and we will expand this brand into our other successful connector treatment products.
DeoxIT® Fader F-Series is a precision lubricant specifically formulated to improve conductivity and lubricate conductive plastic and carbon compound faders, switches and other similar components. Over time these components lose their original lubrication from wear and/or repeated cleaning. Dust, dirt, drink spills and other contamination also degrade the components' lubricant. The need for re-lubrication is necessary to avoid excess wear and abrasion to the plastic surfaces.
Another use for DeoxIT® Fader is on conductive membrane switches and components. Oil, grease and acids build up on the membrane surfaces due to repeated finger contact and can lead to device malfunction. Applying DeoxIT® FaderLube will provide a long-lasting barrier against these types of contamination. The oil, grease and acids will be displaced above the DeoxIT® Fader layer preventing contact with the plastic membrane.
Lubrication/protection of plastic-to-plastic parts (faders), plastic-to-metal parts (faders, linear sliders - dot matrix printers), metal-to-metal parts (sliding and slow rotating metal parts, locks, bearings), carbon-based controls (potentiometers) and membrane switches (mouse pointers, touch keypads).
THE Go-To Contact Cleaner
Posted by Ed on 8th Jan 2016
The CAI/Deoxit line of contact and fader cleaners are the best available; specifically made to get the job done without the risk of damage to the materials used in electronic components. And Apollo AV has the best prices on the multi-packs of Deoxit and they ship very quickly. I can recommend them for best value and service.